Empowering Hay Decisions A Detailed Exploration of Different Samples

Hay testing sounds more difficult than it really is. Basically, you take a sample of hay from 15 to 20 bales (small squares), or a good ... Step 1: Identify a single lot of hay · Step 2: Sample close to the point of sale or feeding · Step 3: Use a sharp, well-designed hay probe · Step 4 ... There are two ways you can take hay samples: with a hay probe or by hand. Regardless of the technique used, the sample should be representative of the entire ... A hay quality analysis is valid only to the extent to which the sample represents the lot of hay. ... Laboratory evaluation of alfalfa and other hay ... We recommend a minimum of 20 cores for a composite sample to represent a hay lot. This is the same for large (eg 1 ton bales), or small 2-tie or 3-tie bales. A hay analysis will reveal the specific amount of various nutrients that are found in the hay. These days, it is relatively simple to obtain a hay analysis. to two different labs—the samples are likely to be genuinely different! To test two labs, either grind and carefully split the sample, or better yet, ask for ... A sample is obtained by drilling with a brace. The sample should be as representative of the composition of the hay bales as possible. The ... And the best way to tell exactly what you got and and then, um make management decisions on how to feed that hay based on the quality of it is ... Grabbing and pulling hay from different bales is not the correct method, and it will not provide uniform samples for analysis. Producers should sample 15 to ...